Courses We Provide

This involves the correct use of the ATV.

HSE regulations are used as a basis, so that the training satisfies the authorities and the Norwegian Labor Inspection Authority’s requirements for safe training.

We start with a review of the four-wheelers, service and maintenance. Furthermore, we will review laws and regulations regarding the use of ATVs and UTVs. Here, the law on motor traffic in rural areas will be thoroughly reviewed.

Practical driving

Practical driving will include elements such as driving position and balance training. In terrain, route selection is very important for safe driving. Driving with load and securing will be reviewed. In the practical driving, emphasis will be placed on the participant’s daily needs.

We use the latest ATV models

• The courses are held in Eidsberg, but can also be held outside at the companies if the training area and number of participants are satisfactory.
• The courses are conducted according to HSE requirements.
• Successful completion of the course leads to a certificate of competence.

Contact us for more information!

The employer is obliged to provide such training in terms of the Working Environment Act and associated regulations.

After completing the course, you must be aware of the dangers that may arise during your working day, and how you best handle these so that you can create the conditions for a safe workplace.

Content of our course

• Laws and regulations
• HSE – health, environment, and safety
• Expert and daily control
• Fall prevention measures
• Types and structure of scaffolding, ladders and fall protection equipment.
• Legislation regulating work at height
• Requirements for non-life insurance
• Ladders
• Scaffold
• Work on roofs
• Fall protection
• Practical review

Feel free to contact us if you would like more information regarding our Work at Height course!

Training

Documented

Theory / Practice

Theory / Practice

Issuer

Dato Opplæring AS

Admission requirements

None

For those who work in professions where the use of truck cranes occurs, there is a requirement to complete safety training, where you learn how to use machines and equipment in the best possible way to ensure a safe working environment.

Dato Opplæring AS provides courses in truck crane G8, where you get thorough training and practice from our instructor.

The purpose of the course

The purpose of the training is to give future G8 truck crane operators a good theoretical basic training in the safe use of truck cranes.

The training should give students a good insight into the principles for using lifting equipment G11 and G8, the construction, operation, stability, maintenance and use of the truck crane, so that mishaps and accidents in connection with lifting operations are avoided.

Implementation

All our truck crane courses are adapted to your work tasks. Precisely to make the course as relevant as possible for you as a course participant. It is important to us that you feel safe and secure in your work.

After passing the final theoretical exam and practical training, a certificate of competence is issued.

Additional courses

G4 – Overhead crane

For in-house courses, contact us for information and offers on truck crane courses!

Information / Prices

Training

Certified

Theory / Practice

Theory / Practice

Issuer

SFS

Admission requirements

None

The course is conducted as a classroom course or an online course (the online course is only offered for the theoretical modules).

Course modules 1 and 2.1 are the theoretical modules. With us, you can take all required modules together, i.e. a complete course. Modules 3.1 and 4.1 are practical training at our training area, and must be completed in order to sit for the final machine operator test.

Modules 1, 2 and 3 must be completed in the same training company. Completed module 1 is normally valid for three years. Volume training (module 4) can be carried out in a company or with us. The training ends with driving, which can be carried out at the training company.

MODULE 1.1 Working environment, responsibility and consequences (duration of 8 school hours)

• Introduction
• Laws and regulations
• Working environment, responsibilities and consequences
• Environmental
• Safety regulations for the use of safety equipment
• Dangerous goods, labeling and handling
• The exam (written theoretical test with requirement to pass)

MODULE 2.1 Theory course – Machine operator (24 school hours duration)

• Introduction with requirements for machine operators
• Areas of use for the individual machine types in the workplace
• Accidents with machinery. Accidents in general within construction
• Structure of different machine types
• Maintenance of machines
• Hydraulics
• Diesel engine
• Certification/documentation
• Practice tasks
• Exam

MODULE 3.1 Practical use – Basic practical training (duration of 8 school hours)

• Function and operation of the main components on relevant machines
• Control points on the machines
• Working environment, responsibilities and consequences
• Areas of use and operation of relevant machines
• The machine’s working area
• Machine used for lifting loads
• Use of lifting equipment
•  Practical use of the machine

Explanation of M classes for machines over 15 kw

• M1 = Doses
• M2 = Excavator
• M3 = Grader
• M4 = Wheel loader
• M5 = Backhoe loader
• M6 = Dumper

Please feel free to contact us for more information.

Information / Prices

Training

Certified

Theory / Practice

Theory / Practice

Issuer

DSFS

Admission requirements

None

Modules that reduce prices

Module 1

Price: 1 Machine class

NOK. NOK 12,000

The purpose is to increase safety training when using personal lifts, and to help reduce the risk of working with lifts so that the employee does not expose himself or others to unnecessary dangers.

The course has a preventive effect on accidents, and creates a safer working environment with conscious attitudes. On the lift course, we review the legal basis and safety theory regarding the training, use, control and maintenance of personal lifts.

We also have a practical review of the construction, use and control of personal lifts.

The aim of the course

Increased knowledge and a better attitude towards safety when using personal lifts, as well as documenting the safety training in accordance with requirements in the regulations.

Course content

• Working environment and HSE
• Check and preparation before use
• Laws and regulations regarding personal lifts
• Security theory
• Maintenance, control, correct and safe use of personal lifts
• Emergency driving (Viken Kompetanse reserves the right to have enough participants)

Training

Documented

Theory / Practice

Theory / Practice

Issuer

Dato Opplæring AS

Admission requirements

None

Price:

NOK 1,950

In order to be able to handle a telescopic forklift in a responsible and safe manner, a driver’s license for a telescopic forklift is required. With us at Dato Opplæring AS, you will find telescopic forklift courses C1 and C2. As a course participant, you will receive training that is relevant to your work tasks. Our course leader has many years of experience from industries where telescopic forklifts are fantastic work tools.

Prerequisites

Passed certified training on: truck, crane or machine

Requirements for you as a course participant

To be able to take the telescopic forklift courses C1 and C2, you must be 18 years old. You must also have a forklift driver’s license (either T4, mass handling machine or G8 crane). From the age of 17, you can practice under a sponsor in the company after passing certified theoretical training. 16 years in training during upper secondary school.

Course content

• Safety
• Structure and operation
• Control and maintenance
• Stability
• Documentation and certificates
• Traffic, safety and goods handling

The exam

Written theoretical test of 1 hour and practical training. After passing the final theoretical exam and practical training, a certificate of competence is issued.

To be able to take the overhead crane course you must have completed G11 Lifting equipment. The proof must be brought with you.

Course

After completing the course, course participants must have acquired basic knowledge and practical skills about the safe use of lifting equipment

G11 – Strap – Crouching and Signaling

The construction, operation, maintenance and use of the overhead crane G4. The goal is good attitudes towards the safe use of lifting equipment

Target group

Users of lifting equipment G11 and G4 overhead cranes. Applies to all land-based, offshore or maritime businesses that use G4 overhead cranes. After passing the final theoretical exam and practical training, a certificate of competence is issued.

Additional courses

G1 – Mobile crane

G8 – Truck crane

Please feel free to contact us for more information.

Theory / Practice

Certified

Issuer

SFS

Entry requirements

Completed G11 Lifting gear

Price

G4 Complete

NOK NOK 12,900

G4 without G11

NOK NOK 9,500

Theory G4 only

NOK NOK 4,700

There are strict requirements when driving a forklift, and the Working Environment Act requires that it be documented that both theoretical and practical training has been completed. With us, you can take all the required modules together, that is, a complete course that leads to a certificate of competence for forklifts.

A good forklift driver’s course is essential for safe, efficient and economical truck driving. Our purpose as a course provider is to create safe and responsible truck drivers with good knowledge and skills.

The theory covers truck class T1-T5, practice on T1-T4 and certificates of competence T1-T2 -T3 and T4 are issued.

It is possible to expand with class T5.

After completing the course and passing the practical and theoretical exam, a certificate of competence is issued from the central register of certified training.

Course content

• Safety, responsibility, maintenance
• Accidents and risk of accidents
• Truck types and additional equipment
• The construction and operation of the truck
• Control, maintenance and reporting
• Stability
• Goods handling
• Traffic, use and safety regulations
• Work environment
• Dangerous cargo

Our aim is to be able to arrange the teaching for each individual course participant. The training officer has a pedagogical background and experience in facilitating those who, for example, have reading and writing difficulties, or other needs.

Contact us if you would like more information regarding our truck driving courses!

You can also make use of online teaching or e-learning.

Truck T1-T2-T3-T4 and option for T5 – Online teaching.

Theory module 1.1 common part crane-truck-machine and module 2.2 special part truck are carried out online with video conference and opportunities for dialogue between instructor and participant.

Practice is done with a limited number of participants per practical part of the course.

Practice is arranged continuously after completion of the theory course.

The exam is done online electronically.

Information / Prices

Price

T1 – T2 – T3 – T4

NOK 6000,-